Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Pumps/Inflation

Properly inflated tires are essential for both performance and safety. Take the chore out of routine tire inflation with a quality floor pump.

Topeak Tri-BackUp Elite 90
$59.95
Being elite means making no compromises when pursuing perfection...everything matters. Mounting your gear in a position to minimize drag is just one tip for performance. The Elite 90 is designed especially for triathlon specific saddles with vertical rear rails. - Material: CNC aluminum - Mount: V rail section of saddle Compatible with CrMo, Ti, & Carbon rails - Hydration Capacity: One or two bottles (up to 750cc each) - Max Load: 2.5kg / 5.5lb - Compatibility: Ninja TC Road, Ninja Pouch+ Road Ninja CO2+ Tri-Cage series - Added Features: 1 Micro AirBooster and 2 16g CO2 cartridges included - Angle adjustable - Size: 8.6 x 7.6 x 7.4cm / 3.4" x 3" x 2.9" - Weight: 102g / 3.60oz (Total), 88g / 3.10oz (w/o inflator bracket)
Park Tool Emergency Tire Boot
$4.95
There’s no easier or more effective way to patch a cut tire on the road or trail than carrying and using Park Emergency Tire Boots (3 per package). These thin, extra-tough patches peel and stick to the insides of tires to repair cuts and contain the tube until you can replace the tire.
Park Tool Super Patch Kit (Carded)
$3.99
The Super Patch Kit is comprised of a small plastic case, a piece of sandpaper for roughing up the tube and 6 peel-and-stick patches so no gluing is required. The patches stick fast thanks to 3M technology and they're thin and flexy to stretch with the tube. There's no easier way to patch a tube.
MSW Ride and Repair Kit w/Water Bottle Cage
$40.00
The essential accessories that complement a new bike are key to having the best experience. MSW Ride & Repair Kits combine all those ride essentials into one convenient, money-saving package. Available in several configurations to meet the needs of different types of riding and different types of riders. - This Ride and Repair Kit has a water bottle cage as well as everything needed for common road-side fixes: an eight-piece multi-tool, three tire levers, CO2 inflator & cartridges. - Lightweight composite water-bottle cage - Three MSW tire levers - Eight-piece flat pack multi-tool with 2/3/4/5/6mm hex wrenches, T25 Torx, flathead & Philips screwdrivers - Windstream Push-On CO2 inflator head - Two 20g CO2 cartridges
MSW XLA-40 Air Cartridge
$12.99
This extra-large, 40-gram threaded air canister packs as much volume as two 20-gram cartridges with half of the weight while boosting available pack space. - Inflator operates at temperatures above 40 degrees Fahrenheit - Canister contains propane for lighter canister weight and increased gas volume - Propane does not affect tubeless sealant - Canister must be used with nozzle facing down - Fits 3/8-inch threaded inflators with 5mm depth from pin to edge of threading
Lezyne 16g CO2 Cartridges (5-pack)
$14.99
Threaded 16g CO2 cartridges for use with all Lezyne CO2 inflators. It inflates 700c road tire to 120psi (8.3bar) or one 26” MTB tire to 30psi (2.1bar). Sold in packs of five.
Lezyne Tubeless Co2 Blaster w/Two 20g Cartridges
$54.99
Innovative 2-in-1 cycling CO2 dispenser and tubeless tire repair kit simultaneously inflates and seals tubeless tires. Machined aluminum construction is both lightweight and highly durable. Hardened steel reamer scours hole, inserts plug, and inflates tire for an efficient and rapid repair. CNC-machined twist knob manually controls release of CO2 gas. Aluminum canister holds the five included tire plugs and safely stores the reamer when not in use. High-quality tire plugs aggressively seal holes that are too large to be sealed by sealant alone (hole size varies from tire to tire). Sleek, compact design fits in a pocket or straps to your bike. Note: Sealing performance may vary based on puncture size, tire size, and tire pressure. - Compact tubeless tire repair kit. - Machined aluminum storage tube doubles as a handle. - Combined tire reamer and insertion tool. - Includes five tire plugs. - Includes 2 x 20g CO2 Cartridge and Velcro Strap.
Bontrager Air Rush Elite CO2 Inflator
$24.99
- For use with Bontrager CO2 cartridges - Regulator design provides safe, controlled operation - Reusable cartridge insulator keeps hands protected while inflating - Compact and lightweight design is easy to store for any ride - Spring-loaded mechanism regulates airflow for both Presta and Schrader valves
Bontrager Air Rush Pro Mini Pump
$57.99
A clever, compact mini pump with hidden hose, pressure gauge, and concealed CO2 inflator. Designed with a chamber for higher-pressure tires, Air Rush Pro Mini Pump is a premium option for quick and easy manual inflation up to 100 psi—or use the included inflator found tucked inside the handle for effortless CO2 inflation. While not in use, Air Rush Pro stows easily in a jersey pocket or mounts cleanly under a water bottle cage with the included bracket. Product details - Two-in-one design combines CO2 inflator and mini pump - Flexible rubber hose quickly connects to pump body with magnetic attachment - Hose can be concealed inside pump when not in use - Pump head securely threads onto Presta and Schrader valves - Presta-compatible CO2 inflator securely stored in threaded handle - Folding handle locks into place to add comfort while inflating - Use included bracket for clean mounting that easily fits under bottle cage
Bontrager Air Rush Road Pump
$34.99
Easy inflation The convenience of CO2 with the ever-ready capabilities of a mini pump, the Air Rush Road combines safe, controlled CO2 inflation with the back-up security of a telescoping pump. At just 72g, the Air Rush's compact design easily fits in a jersey pocket or seat pack. Product details - 2-in-1 design combines CO2 inflator and mini pump - Ultra-compact size easily fits in a jersey pocket or seat pack - Includes reusable cartridge insulator to protect hands - Pump inflates tires if you're out of CO2 - 72g - Includes two 16g cartridges, mounting bracket, and required hardware
Bontrager Air Support HV
$34.99
Bontrager's Air Support HV is a life-saver when you flat out on the trail. A large volume chamber makes it a breeze to use on fat mountain bike tires. It has an easy-to-use thumblock, an auto-selecting head that fits Presta and Schrader valves, plus a fold-out T handle and a dual action for fast inflation. The Air Support HV is compact and light and it comes with a mount to carry it on your frame.
Bontrager Air Support w/Gauge
$34.99
Product details - Intended for low and mid-volume pavement tires - Inflates tires to 80 psi (5.5bar) with little effort - Auto-select head locks securely onto Presta or Schrader valves - Fold-out lever securely locks pump head to valve - Mounting bracket fits easily under bottle cage - Easy to read pressure gauge puts information within view
Bontrager Charger Floor Pump
$39.99
A reliable floor pump featuring a durable steel barrel, an auto-select head, and a stable base. Fresh air for your tires Nothing slows a cyclist down like an inappropriate amount of tire inflation. Loaded with features like a stable, tip-resistant base, a durable steel barrel, and an auto-select head, the Charger stands ready whenever your tires need a little boost. Product details - Steel construction and replaceable internals provide long-term durability - Auto-select head instantly fits both Presta and Schrader valves - Large, stable base minimizes tipping - Easy-to-read 3-inch base-mounted gauge - Max pressure 160 psi (11bar)
Bontrager Dual Charger Floor Pump
$69.99
A versatile floor pump that allows for easy transition between high volume and high pressure settings. A pump for road and MTB The Dual Charger Pump is versatile floor pump with multiple pressure settings that let you easily inflate high-pressure road tires and larger volume hybrid and MTB tires. A quick flip of the switch moves between settings, making it perfect for riders who own both a road and mountain bike. Product details - Steel construction and replaceable internals provide long-term durability - Auto-select head instantly fits both Presta and Schrader valves - Large, stable base minimizes tipping - Easy to read 4-inch base-mounted gauge - Base-mounted switch allows for easy transition between high volume and high pressure settings - High volume setting allows for quick inflation - High pressure setting allows for easy inflation as PSI increases - Max pressure 160 psi (11bar)
Bontrager Presta Valve Extenders
$19.99
Use Bontrager's Presta Valve Extenders with a deep section wheel and you'll always be able to keep things properly pumped. They must be used with a removable valve core tube.
Bontrager Shock Pump
$49.99
For the perfect pressure A shock pump with an accurate, easy-to-read gauge and a thread-on design that minimizes bleed off so you can easily adjust your shock pressure. The perfect pressure takes precision. The Bontrager Shock Pump features a large, easy-to-read gauge for accurate readings, a bleed valve for pinpoint accuracy, and a thread-on design that quickly attaches to front and rear suspension shocks for a reliable, secure connection. - Easy-to-read gauge that is accurate to 400 PSI - Threaded design for a secure connection that reduces bleed down - Bleed valve reduces pressure in small increments - Suitable for use with front forks and rear shocks
Bontrager Super Charger
$119.99
Aluminum construction, a built-in air release valve, and an extra large, raised gauge provide the ultimate combination of lightweight, durability, and usability. The one pump for every bike Graced with a solid aluminum barrel and a built-in air release valve, Super Charger is the super-strong, ultra-precise floor pump roadies and mountain bikers can both agree is awesome. Auto-Select head instantly fits both Presta and Schrader valves while replaceable internals give this floor pump an extended life. Product details - All-aluminum barrel, base, handle, and gauge construction is lightweight and durable - Large, stable base minimizes tipping - Replaceable internals increase functional life span - Auto-select head with alloy levers instantly fits Presta and Schrader valves - Built-in air release valve makes it easy to dial-in pressures - Extra-large, raised 2.5-inch (6.5cm) gauge puts pressure info within easy view - Long 45-inch (114cm) hose, max pressure 160 psi (11bar)
Bontrager TLR Flash Can
$69.99
Travel-ready tubeless set-up TLR Flash Can makes setting up tubeless tires at home and on the road a breeze. This easily transportable air canister inflates with a traditional pump, and a quick flip of the lever instantly releases stored air for smooth tubeless tire seating. The TLR Flash Can is designed for efficient installation of tubeless ready (TLR) tires without the need for a compressor. Product details - Inflates tubeless ready (TLR) tires without a compressor - Holds up to 160PSI (11 bar) of air pressure - Inflate Flash Can with any Schrader compatible floor pump - A simple flip of the lever releases stored air - Unique 'flash charge' function rushes air into tire - Auto-select head instantly fits both Presta and Schrader valves Specifications - Pump type: Floor - Valve: Presta/Schrader - Gauge type: No gauge - Max pressure: 160psi - Frame mounted: No
Bontrager TLR Flash Charger Floor Pump
$119.99
A floor pump with a pressurized chamber makes at-home and on-the-fly tubeless setup a breeze. Game-changer With Flash Charger TLR, setting up tubeless tires at home and on the road is a snap. Pinkbike.com's product of the year is designed for efficient installation of Tubeless Ready TLR tires without the need for a compressor. A pressurizable chamber instantly releases air creating seamless tubeless tire seating. Air compressors are so over. Product details - Alloy barrel for smooth pump action - Auto-select head instantly fits both Presta and Schrader valves - Top-mounted 160 psi gauge - Large, stable base minimizes tipping - Inflates tubeless-ready tires without a compressor
XLAB Multi-Strike Repair Holder
$27.95
XLAB's versatile Multi-Strike Repair Holder provides fast access to your repair kit, whether you have tubular or clincher tires. Carry CO2s and an inflator on one side and a spare tube/tire or pump on the other! - VERSATILE MOUNTING - Will mount on DELTA single bottle systems or at the rear of the XLAB CARBON WING and SUPER WING (each sold separately) - STORAGE SAVER - Mounts to your hydration carrier (sold separately), saving space in your storage bag for your cell phone, nutrition and other important items - FAST ACCESS - Simply unscrew, and attach your inflator and CO2 cartridges. Simply unstrap your spare tire, tube or inflating foam sealant. - The CO2 Holder holds 2 CO2 Cartridges (included), and a NANOFLATOR or SPEED CHUCK inflator (each sold separately) - The Multi Holder can hold a tube, inflating foam sealant, TIRE MATE or tubular tire (each sold separately - must purchase optional XCW STRAP if storing a tubular tire) - Glass Reinforced Nylon - Chassis weight: 30 grams Includes: - Center Plate - Multi Holder - CO2 Holder - 2 AIR STRIKE CO2 Cartridges - Hardware Popular Clincher Setups (accessory items sold separately) - Tube & tire levers on Multi Holder. Two CO2 and a NANOFLATOR inflator on CO2 Holder. - 4 CO2 cartridges and NANOFLATOR inflator. (Purchase an extra CO2 Holder) Popular Tubular Setups (accessory items sold separately) - Tubular tire on Multi Holder. Two CO2 & NANOFLATOR inflator on CO2 Holder. - Tubular tire and inflating foam sealant. (Purchase an extra Multi Holder)
XLAB Sonic Nut Inflation Holder
$22.95
Why have your CO2 cartridges rattling around in a seat bag when you can get Xlab's Sonic Nut Inflation Holder and store them behind your saddle? It holds two threaded CO2 cartridges and an inflator (each sold separately) in an easy-access location. The Sonic Nut is compatible with Xlab's Sonic and Turbo Wings.
XLAB Starter Kit
$93.95
- Complete packaged system containing all essential items for training and Sprint race distances • Includes the key -items for training - Includes essentials you need for short triathlons - Supplies your hydration, nutrition, and repair storage needs along with inflation accessories Includes: - TORPEDO SYSTEM 50: Refillable 26 oz aerobar mounted hydration system. No tools required for installation. - STEALTH POCKET 100: All-purpose nutrition & repair top tube storage bag accommodating most bikes - NANOFLATOR: Easy to use inflator, with a twist to inflate function, for controlled inflation - AIR STRIKE CO2 cartridge: One 16 gram CO2 cartridge
XLAB X-Nut Inflation Holder
$22.95
Why have your CO2 cartridges rattling around in a seat bag when you can get Xlab's X-Nut Inflation Holder and store them behind your saddle? It holds two threaded CO2 cartridges and an inflator (each sold separately) in an easy-access location. The X-Nut is compatible with Xlab's Carbon and Super Wings.
Vittoria Pit Stop Tire Sealant
$10.99 - $14.99
You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - MTB 50 mL: Repairs and inflates low-volume MTB tires in less than a minute. - MTB Magnum 75 mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.
TwoFish Twofish Bikeblock Inflator Holder
$7.90
- Solution for mounting pumps and C02 inflators on frames or seatpost - Soft rubber block and Velcro loops hold pumps tightly
Topeak Airbooster G2 CO2 Inflator
$44.95
The world’s first CO2 inflator with tire gauge provides tire-inflation and tire-pressure measurement. The angled head fits Presta and Schrader valves and a special feature allows the user to adjust the flow while filling the tire. Dual-end design allows for one-cartridge storage. - CO2 inflator that features a gauge as well - Flow is adjustable using special feature - Compatible with both Presta and Schrader valves - Presta/Schrader with integrated dust cap, Push to inflate - Gauge: Reads 160 psi / 11 bar, 1-1/2” analog - Engineering-grade polymer - Weight: 45g /1.59 oz - Size: 6.5 x 5.2 x 3.3 cm / 2.5” x 2” x 1.3” - Accepts threaded cartridges - CO2 cartridges sold separately
Topeak Floor Pump Parts Kit
$4.95
Replacement parts for JoeBlow Pro and JoeBlow Booster.
Topeak JoeBlow Max HP Floor Pump
$39.95
Topeak's Joe Blow Max HP quickly inflates tires with a durable steel barrel, a sturdy composite base, a padded handle, and a tight-sealing TwinHead that fits Presta, Schrader and even Dunlop valves. You'll also appreciate the extra-long hose and big, easy-to-read gauge.
Topeak Mini Dual DXG
$29.95
Topeak's Mini Dual DXG is constructed of lightweight aluminum and sports a grippy Kraton and plastic handle for easy pumping. Topeak's thumb-lock SmartHead ensures an airtight seal on both Presta and Schrader valves and the built-in gauge lets you top off your tires with precision.
Topeak Mini Morph
$34.95
Topeak's Mini Morph is the perfect answer for riders who've had trouble deciding if they want a frame or floor pump. The Mini Morph is both! For maximum pumping power, it features a high-volume aluminum barrel, a fold-out base, a long hose and a T handle. A frame mount is included, too.
Topeak Mini Pump Bracket (Centerline Mount)
$4.95
Mounting kit for Mini Morph and Road Morph G.
Topeak Mountain Morph
$39.95
Lightweight and powerful, Topeak's Mountain Morph is a mini-pump that works like a floor pump. It features a fold-out base you can stand on, a long hose, a padded T-handle and a high-volume aluminum barrel for easy inflation. A frame mount is included, too.
Topeak Pocket Rocket
$24.95
Topeak's Pocket Rocket boasts an aluminum barrel for superb function, durability and max pump power, while its plastic handle ensures pumping comfort. And, its aluminum thumb-lock head fits both Presta and Schrader valves.
Topeak Pocket Shock DXG
$49.95
The Topeak PocketShock DXG just got better with a higher pressure rating. This precision fork and shock pump features an easy-to-read dial gauge for accurate pressure readings up to 360 psi / 24.8 bar! The flexible hose takes stress off the valve stem when pumping, protecting your expensive fork and shock fittings. An air release button and Pressure-Rite connector makes setting proper pressure easy and eliminates the common problem of air loss when disconnecting.
Topeak Pressure-Rite
$14.95
Pssstttt. Tired of hearing that when you disconnect your shock pump? Well, hear it no more thanks to Topeak's Pressure-Rite. It's a must have for suspension fanatics as its ingenious design prevents air loss when adjusting shock and fork pressure. It's also available in a Presta version, perfect for disc wheels.
Topeak Pressure-Rite Schrader Valve Adapter
$19.95
A Schrader valve adapter allows using the JoeBlow Ace floor pump for quickly pumping forks and rear shocks. Built-in air release knob allows fine tuning air pressure.
Topeak Presta Valve Extender
$6.95
Topeak's Presta Valve Extender is the perfect solution for getting to those hard-to-reach valve stems. It's precision-machined from aluminum and is designed to fit deep-dish carbon and aluminum rims. And, it comes with an O-ring seal to ensure a leak-free fit.
Topeak Shuttle Gauge Digital
$64.95
Easy-to-read digital gauge can be attached to a pump or used alone and provides accurate pressure readings up to 300psi / 20.7bar. Rotating head works with Presta, Schrader or Dunlop valves on bike / motorcycle / car tires, forks or shocks while the Thumb Lock lever ensures an airtight seal. The air release button allows fine tuning pressure. Specs - PUMP HEAD COMPATIBILITY: Presta / Schrader pumps - TIRE VALVE COMPATIBILITY: Presta / Schrader / Dunlop valves - GAUGE: Digital, 300 psi / 20.7 bar - UNIT: psi, bar, kg / cm2 - BATTERY: CR2032 x 1 (included) - THUMB LOCK: Aluminum - PRESSURE TUNING: Air release button - BODY: Aluminum / Engineering grade polymer - SIZE: 9.2 x 5.8 x 4.3 cm / 3.6” x 2.3” x 1.7” - WEIGHT: 102 g / 3.60 oz Added Features: - Rotatable head / gauge - Auto-off function
No Image
$39.99
This mini sized gauge can be attached between the pump and valve to read pressures while pumping or used alone. Provides pressure readings up to 160 psi / 11 bar. Rotating gauge is easy to read and the head works with Presta, Schrader or Dunlop valves on bikes / motorcycles / car tires, forks or shocks while the Thumb Lock lever ensures an airtight seal. An air release button allows fine tuning of pressure. - Pump Head Compatibility: Presta / Schrader pumps - Tire Valve Compatibility: Presta / Schrader / Dunlop valves - Gauge: Reads 160psi / 11 bar, 1-1/2" analog - Pressure Tuning: Air release button - Material: Engineering grade polymer / aluminum - 360 degree rotatable gauge, Dust cap - Size: 6.2 x 5.8 x 3cm / 2.4" x 2.3" x 1.2" - Weight: 50g / 1.76oz
Topeak SmartGauge D2
$39.95
Topeak's SmartGauge D2 boasts a digital readout that goes up to 250 psi and it's compatible with Presta and Schrader valves, as well as shocks and suspension forks. The head rotates 180 degrees to get in tough spots, and an air release button helps you dial in the perfect pressure.
Topeak SmartHead ThreadLock Upgrade Kit
$17.95
Topeak's incredibly compact CNC aluminum Threadlock Upgrade Kit threads directly to Presta or Schrader Valves with no need to change internal parts or use extra adapters. It fits most rubber pump hoses, and is compatible with Topeak JoeBlow Ace, JoeBlow Mountian, JoeBlow Sport II, JoeBlow Max II and JoeBlow Max HP.
Topeak Tri-BackUp Elite
$59.95
Being elite means making no compromises when pursuing perfection...everything matters. Mounting your gear in a position to minimize drag is just one tip for performance. The Tri-BackUp Elite is specifically designed for saddles with angled rear rails. - Material: CNC aluminum - Hydration Capacity: One or two bottles (up to 750cc each) - Compatibility: Ninja TC Road, Ninja Pouch+ Road Ninja CO2+ Tri-Cage series - Mount: V rail section of saddle Compatible with CrMo, Ti, & Carbon rails - Max Load: 2.5 kg / 5.5 lb - Added Features: 1 Micro AirBooster and 2 16g CO2 cartridges included - Angle adjustable - Size: 8.6 x 7.6 x 7.4 cm / 3.4” x 3” x 2.9” - Weight: 102 g / 3.60 oz (Total) 88 g / 3.10 oz (w/o Inflator Bracket)
Topeak TubiBooster X
$79.95
An aluminum air chamber with inflator head that stores an air charge of one liter, up to 200psi / 14 bar. Works with a floor pump to quickly fill your tires and ensures proper installation on a tubeless rim at home. Once you flip the selector from "CHARGE" to "INFLATE" mode, air bypasses the chamber as you use the floor pump to inflate your tire to the perfect pressure. An integrated flexible hose with pump head works with Presta and Schrader valves and takes stress off the valve stem while pumping. - Pump Head Compatibility: Presta pumps - Tire Valve Compatibility: Presta / Schrader valves - Air Chamber: One liter, Store up to 200psi / 14 bar air pressure (Varies with the pump capacity) Working Pressure - 1800psi / 124 bar - Material: Aluminum / Rubber / Engineering grade polymer - Flexible hose - Weight: 985g / 2.17oz (Total) 820 g / 1.81lb (Air chamber) - Hose Length: 26 Size - 36 x 11.4 x 8.6cm / 14.2" x 4.5" x 3.4" (Total) - 28.5 x 8.1cm / 11.2" x 3.2" (Air chamber)
Topeak Turbo Morph Digital
$74.95
Advancing the award-winning Morph with high tech—introducing the Turbo Morph Digital. Top-mounted flip-down digital gauge makes reading pressure easy and provides accurate tire pressure up to 160 psi / 11 bar. The fold-out foot peg and flexible hose provides excellent stability for more efficient pumping. Specs - HEAD: Presta / Schrader / Dunlop valves - BARREL: Butted aluminum - GAUGE: Flip-down digital, 160 psi / 11 bar - BATTERY: CR2032 x 1 (included) - VOLUME PER STROKE: 103.2 cc - THUMB LOCK: Plastic - HANDLE: T-type dual density polymer - SIZE: 35 x 7 x 4.3 cm / 13.8” x 2.8” x 1.7” - WEIGHT: 320 g / 11.29 oz Added Features - Fold-out foot peg - Flexible hose - Centerline mount bracket
Topeak TwinHead Pump Rebuild Kit
$4.95
Topeak Pump replacement parts and accessories. Includes all parts needed to rebuild TwinHead pumps.
SKS AirKompressor 12.0 Floor Pump
$54.99
SKS's AirKompressor 12.0 Floor Pump can handle it all. The E.V.A. head works with all valves and the 174 psi/12 bar max pressure lets you fill up even the highest quality road tubulars. Fat mountain tires are also easy to air up, too, thanks to the high-volume, extra-long steel body. And, an oversize gauge and long hose make the AirKompressor perfect for every job.
SKS Airbuster CO2 Inflator
$27.99
- Aluminum housing - Integrated pressure control regulator - Dust protection cap - Compatible with 16-gram and 24-gram threaded CO2 cartridges - Includes replacement 16-gram cartridge, water bottle clip, and 2-point pump holder - Presta and Schrader compatible
SKS Digital Airchecker
$36.99
The Airchecker from SKS is a fast and easy way to check your tire pressure. The swiveling head makes it a snap to reach your presta or schrader valve stem at any angle, and the backlit display with extra-large LED digits is always easy to read. This gauge measures up to 144 psi and reads in 10ths of psi.
SKS EVA Pump Head Grommets
$6.99
Bag of 3 replacement washers for EVA heads on all SKS floor pumps
SKS Pump Adapter with Chain
$7.99
Easily adapts schrader only air compressors, floor pumps, and mini pumps to work with presta valves
SKS Rennkompressor Floor Pump
$74.99
SKS's Rennkompressor Floor Pump is a legend. For over four decades, this German work of art has been the go-to pump for countless cyclists the world over. The E.V.A. head works with all valves and the 230 psi/16 bar max pressure can fill even the highest quality track tubulars. Sturdy aluminum construction, an oversize gauge, and a long hose will make it your go-to pump, as well.
SKS RideAir
$69.99
The SKS RideAir is the first refillable air tank from SKS for when you are on the road. It can be used in place of a pump or C02 cartridges emergency tire repairs. The RideAir effortlessly fills your tires in seconds. Simply refill the canister at home using your floor pump. This simple and environmentally friendly solution can be safely transported in your bottle cage. The RideAir is also a must have for tubeless tire riders: it saves space and sets up almost all tubeless tires. - Fits in a standard water bottle cage - Fills from an air compressor or high pressure pump via a Schrader valve - For tire inflation, fits to Presta, Schrader or Dunlop valves - Integrated canister pressure gauge
SKS Supershort Mini Pump
$29.99
Super small and super light, SKS's Supershort Mini Pump is great for the minimalist rider. The head works with both Schrader and Presta valves, and the handle folds into a T for easy pumping.
SKS TL-Head Set
$32.99
The TL-Head Set pump head is a new solution from SKS for all tubeless tire inflation. It is compatible with SKS floor pumps and all others with a 5.0-5.7mm hose size. The TL-Head Set can be used both for conventional pumping and with CO2 cartridges for a simple seating of tubeless tires. It comes in a practical set containing 2 tire levers and 2 16g CO2 cartridges. - Includes TL-Head, two 216g threaded cartridges and two tire levers - Compatible with Presta, Schrader and Dunlop valves
RockShox High-Pressure Fork/Shock Pump (600 psi Max)
$47.00
Keep your suspension pressure dialed-in with RockShox's High-Pressure Fork/Shock Pump. It features an aluminum barrel with an ergonomic handle, a handy finger-tap bleed adjust button for fine-tuning settings, and a large gauge. The hose swivels 360-degrees to fit anywhere. And it handles an astounding 600 psi max.
Profile Design CO2 Mounting Bracket
$16.99
Profile Design's CO2 Mounting Bracket is a small, light holder that attaches to any Profile rear-mounted drink system or under any bottle cage. Once in place, the bracket provides a handy place to carry a CO2 refill cartridge for your CO2 inflator (Profile drink system, bottles, CO2 cartridges and inflators sold separately).
Problem Solvers 90 Degree Presta Valve Inflator for disc wheels
$14.99
Problem Solvers 90 degree Presta valve inflator is used to inflate disc wheels, thanks to its narrow, low-profile head. • Presta valve • 90 degree inflator works with most pump heads
Problem Solvers Air-Bob Replacement Head
$9.99
If you own an Air-Bob inflator, you probably use it A LOT. When you finally wear out the original inflator head, no problem, here's the replacement part to get you back up and running.
Prestacycle Alloy Quick Coupler Kit
$12.95
Upgrade your heavy Brass or Steel coupler. Made with 6061-T6 Alloy – it’s as strong as Brass and only 1/3 the weight. Less weight in your hand means you can focus more energy on your work. Coupler weight 31 grams, compare to around 100 grams for Brass or Steel. I/M (Industrial / Mechanical) standard sizing will also fit your existing I/M connectors. CNC machined with stainless steel bearings and a nice polished finish. Kit option includes coupler plus three male plugs and one female plug.
Prestacycle Angle Mini Presta Head
$12.95
Prestacycle's new Mini Angle Presta Head has more room to fit into more wheels. It includes their newest version of the Mini Presta Head Gasket using Urethane Elastomer. It’s softer and stronger. It lasts more than 5 times longer, gives a better seal and flexes to work anywhere along the Presta shaft for better tubeless tire application.
Page 1 of 3 Next page